• Rectangle 1/2" Hollow Pin Top Square Shaft Baluster Mister Baluster
  • Rectangle 1/2" Hollow Pin Top Square Shaft Baluster Mister Baluster
  • Rectangle 1/2" Hollow Pin Top Square Shaft Baluster Mister Baluster
  • Nero opaco, Nero strutturato, Bianco opaco, Argento perlato, Bronzo lucidato a olio, Rame venato, Argento venato, Oro Dorado, Grigio canna di fucile, Rame bruciato, Oro ottone, Grezzo/Non rifinito
  • Rectangle 1/2" Hollow Pin Top Square Shaft Baluster Mister Baluster
  • Rectangle (Bare/Unfinished) 1/2" Solid Square Shaft Baluster (2.25" Width) Mister Baluster
  • Balaustre rettangolo 1/2" quadrato cavo - Mister Baluster
  • Double Square Collar 1/2" Hollow Square Shaft Pin Top Baluster Mister Baluster
  • Plain 9/16" Hollow Round Shaft Round Top Baluster Mister Baluster
  • Rectangle (Bare/Unfinished) 1/2" Solid Square Shaft Baluster (2.25" Width) Mister Baluster
  • Rectangle (Bare/Unfinished) 1/2" Solid Square Shaft Baluster (2.25" Width) Mister Baluster
1 12

Rettangolo 1/2" cavo Pin Top quadrato Balaustre

Rettangolo 1/2" cavo Pin Top quadrato Balaustre

R-12S-PT

$9.99 CAD
$9.99 CAD
In offerta Esaurito
Spese di spedizione calcolate al check-out.
Unlock Pro Pricing
Live Chat Call 🇨🇦

Available 7 days a week, 8am–11pm (Toronto time).

Need help? Chat (bottom right) or text 647-354-5506. Available 7 days a week, 8am–11pm (Toronto time).
U.S. Import Duties and Tariffs range from 50% to 75% depending on the product. This will be reflected at checkout and is not included in the price on this product page.

Dettagli
Materiale: Ferro battuto
Forma dell'asta: Quadrato
Larghezza: 1/2"
Anima: Cavo
Parte superiore del balaustre: Punta a perno/Tassello
Lunghezza del rettangolo: 24 pollici
Larghezza del rettangolo: 2,25 pollici


Installation Methods +

Method 1: Pin Top/Dowel on Top and Shoe on Bottom (Most Common)

  • Drill a hole in the underside of the handrail (1.5" deep) and in the floor (0.5" deep).
  • Cut your baluster to length using a metal abrasive cutting tool or hack saw. Cut from the bottom of the baluster.
  • Put your shoes on each baluster, secured with masking tape.
  • Put epoxy in the top and bottom hole.
  • Put the top of the baluster in the handrail first, and then drop the bottom into the floor hole. 
  • Apply a bit more epoxy in the top hole and let it sit for 24 hours.
  • After 24 hours, remove the masking tape and drop the baluster over the floor hole.
  • Read Detailed Guide With Photos

stairs

cut

Method 2: Screw-Down Shoe on Top and Bottom (Easiest - No Holes Needed)

  • Cut your baluster to length using a metal abrasive cutting tool or hack saw. Cut from to top of the baluster, removing the Pin Top/Dowel.
  • Use either the Flat Screw Down Shoe for flat sections or the Swivel Screw Down Shoe for angled sections.
  • Put each end of the baluster into the shoes and fasten the screws into the handrail and floor. Screws are included with the screw down shoes.
  • Get an Easy Install Kit - 10 Balusters + 20 Screw Down Shoes (No Holes Drilled) here.

stairs

shoes

lengthcuts

Powder Coating +
Powder coating is used for aesthetic appeal and as a protective layer. It is applied as a dry powder and cured under heat. It provides a tougher finish than traditional paints and is more resistant to scratching, chipping, and fading.

To see close-up videos of samples that have been powder coated, click here.

If your desired color isn’t listed, contact us and we can get it custom powder coated for you.

Delivery and Returns +
Delivery
  • Order Processing: Same day to 1 business day
  • Transit Time: 1 to 4 business days

Total time is 1 to 5 business days.

Any custom requests such as length cuts or custom powder coating will add 1 to 3 days. Delivery times may vary. For a more accurate lead time, please contact us.

We ship across Canada and the US.

Returns
Products with no customizations: We accept returns or provide refunds within 30 days of purchase.

Products with customizations: We accept returns or provide refunds in cases of manufacturing defects or damage during shipping within 30 days of purchase.

Contractor Pricing +
We offer discount pricing for contractors, builders and installers. Register to access pro pricing.
Visualizza dettagli completi

Perché siamo esperti in balaustre metalliche

  • 🏭 Mister Baluster produce balaustri di qualità e durevoli in Canada da oltre 15 anni, servendo appaltatori e proprietari di casa.

  • La maggior parte della nostra verniciatura a polvere viene eseguita internamente per una finitura di alta qualità che non troverete nei grandi magazzini o nei tipici rivenditori online.

  • Da Mister Baluster, siamo specializzati in balaustri e offriamo prezzi imbattibili senza compromettere la qualità.

  • Alcuni dei nostri prodotti sono fabbricati in Canada con acciaio canadese. Trovateli qui.

Domande frequenti

Quali prodotti sono fabbricati o modificati in Canada?

Questi prodotti sono 100% fabbricati in Canada con acciaio canadese – dalle materie prime al prodotto finito.

Posso usare le mie balaustre all'esterno?

No, non consigliamo di utilizzare i nostri balaustri all'esterno poiché sono adatti solo per uso interno.

Offrite sconti per le imprese edili?

Sì, offriamo sconti ad appaltatori e costruttori. Per accedere ai prezzi scontati e ai tempi di produzione più rapidi, registratevi.